Name

Here, you define the name of the style. You cannot leave this field empty; the chosen name must be unique, i.e. not identical to another existing name. Aside from these limitations, you are free to choose any name.

Digits

Number of decimal places or significant digits, which are to be displayed. The kind - Decimal Points or Significant - you can select using the adjacent drop down-list.

Thousands delimiter

The digits left of the decimal point will be grouped into thousands.

Show units

The appropriate units will be shown after each numerical value. The units can be adjusted in the Units tab of the Options dialog window.

Show result symbols

The appropriate symbol (dependent on the type of value) will be displayed before each numerical value.

Style

Here, you determine whether the label line should be a simple or an orthogonal (right angle bent) line.

Line

This setting group determines the properties of the label lines (color, style, size and type).

Note that some of the lines cannot be shown when their thickness exceeds 0.394 mm.

End Point Markers

Here, you can determine how both ends of the label line should look like. There are two drop down lists that show the different possibilities.

Line

This setting group determines the characteristics of the object edge lines (color, style, size and type).

Note that some of the lines cannot be shown when their thickness exceeds 0.394 mm.